The M177 Twin-Turbo V8: What W205 C63 S Owners Need to Know
Back to blog

The M177 Twin-Turbo V8: What W205 C63 S Owners Need to Know

When AMG replaced the naturally aspirated M156 with the M177 twin-turbo V8, the reaction from enthusiasts was predictable: skepticism. The M156 was a 6.2-liter naturally aspirated masterpiece. The M177 was smaller, turbocharged, and shared with other AMG models. It felt like a step backward.

It wasn't. The M177 4.0-liter twin-turbo V8 is a genuinely exceptional engine — more powerful, more efficient, and in many ways more sophisticated than what it replaced. But it has its own characteristics, its own maintenance requirements, and its own failure points that every W205 C63 S owner should understand.

What the M177 Is

The M177 is a 4.0-liter twin-turbocharged V8 with a "hot vee" configuration — the turbochargers sit inside the valley of the engine rather than outside the cylinder banks. This packaging reduces turbo lag by shortening the distance exhaust gases travel to reach the turbines, and it keeps the overall engine footprint compact.

In C63 S specification, the M177 produces 503 horsepower and 516 lb-ft of torque. Those numbers put it well ahead of the M156 it replaced, and the torque delivery — available from low RPM thanks to the turbos — makes the car feel effortless in a way the high-revving M156 never did.

The engine is also shared across AMG's lineup: the E63, S63, GLE63, and GT 4-Door all use variants of the same architecture. That's actually a benefit for owners — the M177 is a well-understood engine with a large body of real-world data behind it.

Oil Consumption and the Importance of Monitoring

The M177 is known to consume oil between service intervals, particularly as mileage accumulates. This is normal for a high-output turbocharged engine operating at these temperatures and pressures — but "normal" doesn't mean "ignore it."

Running an M177 low on oil is one of the fastest ways to cause serious damage. The turbochargers depend on a constant supply of clean, pressurized oil for lubrication and cooling. Low oil pressure starves the turbo bearings. Turbo bearing failure on an M177 is an expensive repair.

Check your oil level every 1,000–1,500 miles. Don't wait for the warning light. Use the correct specification oil — Mercedes-Benz 229.5 or 229.51 — and don't substitute with whatever is on the shelf.

Spark Plugs and Ignition Coils

The M177's high compression ratio and forced induction put significant demands on the ignition system. Spark plugs should be replaced on schedule — typically every 30,000–40,000 miles — and ignition coils should be inspected at the same time.

A misfiring cylinder on a turbocharged engine isn't just a performance issue. Unburned fuel entering the exhaust can damage the catalytic converters and, in severe cases, the turbos themselves. If you notice any roughness at idle or under load, have it diagnosed promptly.

Cooling System Maintenance

The hot vee configuration that makes the M177 so responsive also means the engine runs hot. The cooling system — thermostat, water pump, coolant hoses, and the coolant itself — needs to be in good condition to manage those temperatures.

Water pump failure is a known issue on higher-mileage M177 engines. The factory water pump is plastic-impeller, which can degrade over time. Many owners proactively replace it with an upgraded metal-impeller unit during other cooling system work. It's inexpensive insurance against a much larger repair.

Carbon Buildup on Intake Valves

Like most direct-injection engines, the M177 is susceptible to carbon buildup on the intake valves. Because fuel is injected directly into the cylinder rather than through the intake port, the detergent effect that keeps valves clean in port-injected engines doesn't exist here.

Carbon buildup restricts airflow, causes rough idle, and reduces power. The fix is a walnut shell blasting service — a process that blasts the intake ports and valve faces clean without damaging the metal. On a well-maintained M177, this is typically needed around 60,000–80,000 miles.

What the M177 Rewards

None of the above should discourage you from owning a W205 C63 S. The M177 is a robust, well-engineered engine that will last well past 150,000 miles with proper care. The owners who have problems are almost always the ones who stretched service intervals, ignored oil levels, or deferred maintenance.

Attentive ownership — regular oil changes with the correct specification, monitoring oil level between services, and addressing small issues before they become large ones — is what separates a C63 S that runs forever from one that doesn't.

Serviced at White Oak Mercedes

We work on M177-equipped vehicles regularly at our Thousand Oaks shop. If you have a W205 C63 S, E63, or any other M177-powered AMG and you want a shop that knows this engine specifically, we're here.


Own an AMG with the M177? White Oak Mercedes specializes in AMG vehicles and knows this engine well. Schedule a service or contact us to talk through your car's maintenance needs.

Written by

White Oak Mercedes

Thousand Oaks' Mercedes-Benz Specialists · (805) 852-5521